[Thumpin455_GTO]

Originally Posted by BLACKGP

Will the 15 inch rally II wheel be used with this build. And with that 400/200r4 combo, what cam, carb, and exhuast system (mufflers) will you use?

Its getting a 2802 and 1.5 rockers, a Qjet on a stock intake, and a cheap set of Summit headers, cheap summit mufflers, with 2.5" pipes, maybe an X pipe in it. I think I will end up putting the ported 5C heads on it that are on the 455 I pulled from my 70 GTO, and swapping some Comp 995 springs on them that I have laying around. It should make some nice sounds with a slight lope to the idle.

Im thinking either some Ansen slots or Rally I wheels in 15X8 rear and 15x7 front. The rallys with center caps would be more expensive, and Dave doesnt care what the wheels are as long as the tires hold air and drive ok.

Just a cruiser with a little power if Dave wants to have some fun. Right now he thinks he will never see it running, since I havent gotten most of the other projects legal. I have been concentrating on his car more than mine, so that means mine just sit for a while. I want this one running this spring, and with a complete parts car it shouldnt be too difficult. The one thing holding me up is glass, but a member in Wisconsin has it, just need to get down there and pick it up.