[scld1354]

There is a harness and vacuum line that come through the firewall near where the voltage regulator and carb linkage mount to the firewall. (You can see the harness coming through the firewall in the first pic). All the pics were taken with a phone, so I apologize in advance for the quality. I have no idea what any wires from this harness go to....

1) You can see the vacuum line is cut. Where does the vacuum line go?
2) Where does the connector go?


3) This is a single orange wire, with one connector.


4) Looks like a couple of relays? I just need to know where these mount.


5) I am thinking this may mount into the A/C?


Here is the other side of the above connector.


6) Lastly, this is in the engine harness. One of these wires goes between the alternator and the voltage regulator (the Field, I think). Where does the other connector go? I was thinking it would also go to the VR, but the VR only has 3 pins, and I think I already have the remaining 2 pins accounted for...


Thanks in advance!!!