Yes, i filled all the existing rad support mounting holes in the valance and drilled and slotted the new ones, which were lined up with the actual bolt locations. The new holes ranged from 1/2" to 1" away from the originals!
Your black car would have had the same valance but I think the front bumper was replaced with an NOS one 25+ years ago because there were no screw holes underneath where the valance would have mated with it. This may have occurred during the second owner's repainting, when the NOS quarters were installed. Additionally, the rubber nose material was very smooth and perfect on the underside, not something you see on an old bumper.
|
10-21-2013, 09:18 PM
Threaded Mode