| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#3
09-19-2015, 11:28 AM
|
|||
|
|||
'71 and '72 standard nose LeMans differences
The leading edge of the top plate on the '72 core support is different than the leading edge of top plate on the '71 core support.
-when one attempts to bolt a '72 (metal) header panel on a '71 core support, usually the body guy cuts notches in the leading edge of the '71 top plate. The original on my '71 HO post car had suffered this treatment, and I ended up correctly swapping a nice ' 71 top plate back onto it. -the '72 core support leading edge was redesigned to take the '72 metal header panel, but the '72 core support will also accept the '71 FRP (fiberglass) header panel, it's just a few attachment spots will not be used. Most likely, you have a '71 FRP header panel on a 72 core support.
__________________
Buzzards gotta eat... same as worms. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode