[Nicks67GTO]

Originally Posted by johnta1

You don't use the Teflon on fittings that seal by the flare, like AN fittings or tube flares.

The ones used here look OK (that I could see), because it was used on the pipe fitting threads.
(which seal by the threads)



When using the tape, don't have it go past the ends of the fitting.
(none hanging over to peal off into the inside of the hose/tube)

I started 2 threads in and wrapped with the threads. Do I really need to pull it back out?? I'm seeing conflicting info on it. some guys swear the teflon is fine. Others say it leaks. The feed side will be around 60+ lbs since its for EFI if that makes a difference on sealing.