[Frank69]

Have turned the ign switch on with the green wire under the hood grounded and no lite. When I installed the panel last time I installed new sockets and new bulbs and tested all of them. All worked well and were tight. Also examined the new board carefully to be sure it was the same as the old and as well as I could tell it looked great. I too am wondering what the tech found and said it was a short. Doubt if he would remember now. The low brake fluid sensor is not connected properly but it never has been as long as I can remember. This is the wire that hooks to side of the
master cylinder to turn on the brake lite when fluid is low. Still wonder why the alt and oil lite and everything else works and this temp lite is not being agreeable! Thanks again for all your time and effort. Frank69