| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-15-2018, 03:16 PM
|
||||
|
||||
64 versus 65 bracket differences?
I put a 65 326 in a 64 Lemans.
The 65 motor was, I believe, no power steering since it came with a single pulley on the water pump but not for any power steering. I used the brackets for the power steering and alternator from the 64 326, I also had to use the Crankshaft double pulley and double pulley for the water pump from the 64 so the power steering and alternator pulleys would line up. The crankshaft pulley originally on the 65 would not work, the grooves were closer to the radiator by a full groove. Currently everything lines up but I want to add the Vintage Air system and I am having trouble finding an add on single pulley that will work. I have been recommended a triple pulley from RAM Air Restoration but I don't want to keep buying pulleys that are supposed to work but not line up with the alternator and power steering pulleys.
__________________
I don't always cross thread the bolt - but when I do I run that bitch in with an impact until it's tight! |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode