[JMB36TA]

So here’s my dilemma. I dropped my rebuilt motor in a couple weeks ago and hooked everything up. Since then I’ve had a constant drain on the battery. My brake lights were on with the key out. I found the switch had backed out of the bracket and wasn’t making contact with the peddle, but the lights still light up when I step on the peddle with the key out. And my radio display was always on, again, with the key out. I disconnected it from the fuse box and adjusted the brake light switch and there’s no more drain on the battery. I checked the starter and the S terminal wires are not making contact with the positive terminal or the other wires connected to the positive terminal. The only other thing I can think of is a faulty ignition switch. Thoughts? Suggestions?


Sent from my iPhone using Tapatalk