[richardk]

Originally Posted by pilot737

That is a big help. No AC so maybe wouldn't be too hard. So, remove the 4 studs through the firewall? And the heater box is free?

Maybe a cable or two from the heater controls?

I believe there are actually 6 studs, but the only difficult one is the lower outside one behind the inner fender. It's hard to reach but it can certainly be done without removing the inner fender. Then there are 3 cables to remove on the inside, one for temp control, one for the floor heat door, and one for the defrost door. And that's it; it will come right out.