[gto4evr]

you won't have to cut the hood at all for the 68 pan, the relief cut is for mounting the 69 door flapper and you won't have that with the 68 setup. One thing you MAY have to cut is if you've got an early revision of a 68 hood that has bracing that comes down the back side of the hood scoops. (so if you open your scoop, you'd see a 2" wide flap of metal in the way) That was only on the earlier 68 hood scoops that had the third mounting stud used. Here's a picture with one of those with the bracket area that went to the upper hood scoop area cut out. Since it's a 69, if it has the original hood or any late 68-70 hood on it, this won't be an issue either for you.