| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#8
01-04-2021, 05:11 PM
|
||||
|
||||
I have to agree with Neighbors Complaint, I have used a lot of Ferrea over the years, know the owners, spent time at their shop in Florida, currently have a set of Ferrea valves in a ported Edelbrock set of heads done by Keith Wilson.
My heads use 1.71" diameter Exhaust Valves and flow 260 cfm at .600 lift thru the exhaust ports. That is at 25" water test pressure. No need for 1.77" valves in most heads, even under boost conditions. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode