[66 tempest]

Thought I would show what I needed to do to fit the ac vent and switch, along with what stain and linseed oil I used. I opted for the ralley gauges, I also painted the gas gauge needle as it was yellow, and re did my speedometor needle. I did readjust the speedometor needle after taking these pics.. The veneer needs to be trimed just a little for it to fit properly in the speedo pod.. All partswere bought from ames. One thing is that the blinker and high beam pods were not chrome, not sure if the originals were, so if they are you may want to check around to see if any other suppliers have them done that way. Also I applied one coat of stain, and 2 coats of linseed which gave in a nice uniform look.