Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-28-2021, 03:22 PM
jhein's Avatar
jhein jhein is offline
Ultimate Warrior
 
Join Date: Dec 2020
Location: Oregon
Posts: 1,201
Default 70 TA window repair/adjustment

So on my new car the drivers side window is out of adjustment. The top front of the window is low about a good 2 inches and the rear top edge is high about 1 inch when the window is fully raised. I've never been inside the door of one of these before but I've watched some videos and looked at parts diagrams so I have some very basic idea about what's going on in there.

So first, here's what I think happened. The guy who transported it thought it was easier to climb into the car through the window rather than open the door in the trailer. I think that when he did that the window was not all the way down and he pushed something out of place. Don't know if that's possible but that's what I'm thinking.

The window cranks up and down smoothly, but with more resistance than it should. It goes down all the way. no abnormal sounds. Left to right tilt/angle seems OK. Feels tight not loose or rattling.

Any thoughts about what to look for first?

Thanks.

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:41 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017