[tallrandyb]

My car has a couple of "bypass" switches mounted under the dash that energize the compressor and provide power to the air conditioning relay on the firewall (this one makes the fan run at one speed since it is skipping the fan speed switch functions).

According to the wiring diagram, the "clutch control" switch assembly should activate the first, and the "master switch" assembly should control the second.

These two are located in the dash behind the heater/AC controls, correct? And can I get to these to insure the wires are properly connected and put a meter on them to check continuity/etc without having to remove the entire dash? Can I remove the glovebox and/or radio and get to them from below/the side?

I'd like to get the system working correctly from the dash controls, and want to be sure I'm looking at the right things and in the right place.

Thanks!