[djustice]

I have been trying to tune a part of the fuelmap that gives me issues during acceleration.
Going wot from idle or just after about 1000-1100 rpm, what i think is happening is acceleration enrichment is disableing learn when it is active hence this area will never have self learning. i have been manually adding fuel to a portion that is from 80 kpa and up to 105 kpa in the 900 rpm to 2000 rpm area with little change. i have attached the my cfg file and a datalog in the link below.
the datalog has 2x heavy acceleration events one rigth after the log starts and one at very end of the data log, both times experienced stumbeling and hesitation til i eased off the throttle.
if i roll into the throttle and gain more rpm on my way to full throttle there is no issue.
After this log i did a +5% extra fuel to base map in the affected area, but that did produce much worse stumble. so i reverted back.

If anyone is intrested i would love to have feedback on the datalog and base map. there has only been cruising and a few full throttle pulls to about 3500 - 4000 rpm so far. and a lot of transfer learing to base + manual smoothing (no smooth all button used) https://www.dropbox.com/s/92bre9z7ip...20log.rar?dl=0