Tiger heads
Ported by EIC. 460 cfm,titanium valves,brand new Manley springs, Jesel 1.8/1.75 shaft rockers,copper insert between center exhaust valves, drilled and tapped for water between center two exhaust valves (epoxy here),extensively ported matching tiger intake (also epoxy in the plenum). Heads made 1080 hp@7500 on 511. (Still pulling 12 hp per 100 rpm) also
55 mm Lsm cam and isky 903 bushed lifters purchased this setup from another member just heading in a different direction $7500 plus the ride
Sent from my iPhone using Tapatalk
|