| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
||||
|
||||
|
Hey Guys - request help with traction and suspension tuning with 72 GTO.
Car launches straight, carries the wheels But now has a traction issue. New best with a 6.41 at 105.5 and later spun at 106. That was an improvement of over 4 mph when I ran a 6.58 at 101.8 from a carb tune, slight port match and a change from 3.73's to 4.11. Still launching at 3,500 - 2-step with 5,000 still to grab. Turbo 400 4.11 Pro gears with MT 10.5w x 28 slicks Front suspension: QA1 Pro Coil Double Adjustable GM coil over conversion system with 350 # springs Adjusted to 90/10 settings Low friction control arm bushings and ball joints Front end limiters set to no limiting Total Race Weight 3440 Front weight 1860 Rear weight 1580 Percentage Basis Front to rear 55% to 45% Rear suspension: Full length Competition engineering adjustable ladder bars Bottom hole lowest front heim end setting Right bar - slight preload “5 #150 (?) lbs - springs with spring jacks 28 year old Koni single adjustable set at 1 turn tight from lightest setting=Issue(?) Pinion angle 2 degrees negative MT 10.5w x 28 slicks with tubes at 14 pds cold - best runs Thanks Guys, Craig Last edited by CraigG.; 10-29-2022 at 07:43 PM. |
|
|