[Jerseybird]

Thanks in advance
671 on top of my 455, only running 6-7lbs of boost and in this past week the gasket between the blower and intake in the back blew out, first on the right side now the left..when I pulled the blower off and reset it I did not check either the blower or intake for flatness. One reason was bc the first time earlier last week the back two studs nuts were loose ( overlooked), I fixed the first issue and Now I took it out for a cruise and I did nothing crazy just a little foot in it and noticed the whistle and sure enough another leak..had this setup for 6-7yrs never had issues…any help or recommendations sealant, o-ring manifold? I have to take blower back off and will be checking for flatness of both case and manifold, hard to believe this could be the issue but it could be.. the two leaks were on the opposite side of each other at diff times and were in the very back..thanks again