| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
05-11-2023, 10:11 PM
|
||||
|
||||
Suggestions for rear springs with stock locations for strip/mild cruise car
Hey everybody,
Wanted to know a recommendation for rear springs that Had worked with a 2 inch adjustable spring spacer at Afco 5 x 11 #150 is Sitting too low By 1/2 to a three-quarter inch on the right side due to a much heavier battery. Also the springs are old so they may have collapsed some? Choice would be to consider Landrum Springs either roll the dice at the 5 x 13 x 150 or the 5 x 10.5 x 175? The rear end weight appears to be Close to 1580? 72 GTO, Ladder bar car, with 45 to 5000 stall trans brake and 4.11 Gear. Hopefully will end up about here at 60 at 1.35 and 1/4 9.99 10.5 W x 28 MT bias slick at #3440 - 3450 Thanks guys, Craig |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode