FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
![]()
Trying to finish off the electrics in my 1970 GTO. The main harness/fuse block is the original (low miles car, excellent condition). Underhood harness were replaced with American Auto Wire repro's - the originals had been cut off. Also, I replaced the original signal light switch with a new one from M&H.
Something is goofy with my Hazard lights/ signal lights. The hazards work normally, but the signals flash with the ignition key off or on. And I can tell by the sound that the hazard flasher is "clicking" with the signal lights. If I pull the Hazard flasher out of the fuse block the signals work normally - only with ignition on, and thru the signal flasher. But of course then I have no hazard lights... I've got 2 thoughts - First, I used 2 of the same generic flashers for hazard & signals. Possibility I need a specific one for the hazards? Second - my new turn signal switch is defective... Ideas? |
|
|