Pontiac - Street No question too basic here!

          
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 11-29-2023, 03:57 AM
TRADERMIKE 2012 TRADERMIKE 2012 is offline
Suspended
 
Join Date: Aug 2021
Location: Coconut creek FL
Posts: 1,171
Default

[QUOTE=rolling money pits;6469538] I saw cinder blocks being mentioned a few posts back…

I sure hope you’re not using those to support the vehicle in any way, or more to the point, supporting anything you may be sticking your melon under.[/QUOTE

The thing you don't know about me is that I have been in the Boat business all my life, I set up Boats in malls, convention centers, Boat yards and I can remove Trailers from under Boats and Load Boats onto Trailers, got the point. i USE THEM AS SAFTYS, THE ENGINE IS ON STANDS, JACKs and then as a safety precaution, I add additional stands were needed. I also chock the front and back of each wheel etc...

I also am a master at tying ropes to tie down boats and use that knowledge in everything I move and trailer. I have a Car Hauler for my car and a flat Trailer that I constructed from an abandoned Boat trailer, plus a Lawn enclosed type Trailer that I remanufactured to suit my various needs. From going down to Homestead after Hurricane Andrew and painting signs on it for my Carpet business to converting it into a tool box for years, and today it is air conditioned and has 110 for the compressor, etc...

I have many miles towing Boats over the years in and out of Boat shows then I sell the Boats and then I break down the shows. I also lived at the Marina that my father was in business with the owner of an in out storage facility and became the Night watchman too. I had to tie down the Houseboat with spring lines and on all four corners, got the picture yet. There is nothing that I can't tie down safely or tow with a common Truck or Van, I am only limited to my driver's license. I have a 33-motor home Winnebago type, 1984 I think, that I drove. I have carried more cinder blocks from one show to the other than I would like to remember. In fact, in my Martial Arts days, I used to break a flat slab in half for practice. I also chopped a piece of marine plywood between two metal garbage cans and left a 2" deep indentation in each of them. With my foot, I chopped a 2" x 4" x 18" piece of wet pine wood with my foot, it would only bend in half like the oak wet. It turns out that working at a marine yard and breaking oak, wet from crates, was the norm. Later I learned that in shows Martial Artest dry the wood and break it along the grain, not me, I was breaking it wet and against the grain, because I did Know better. Being a Gymnast first gave me the edge on the other people. When I was at Memphis State University, I did a split and scissored up to a Handstand on my finger tips and held it for Bill Wallis who taught at MSU at the time. I have done moves in Gymnastics and with the martial Arts that no Man on earth can do any better, only as well. When I focus on anything and believe I can do it, because another man has done in front of me, then I can do it, with practice. I hope that all of you can stop with the ridicule now that you know to whom you speak! I also dive like a pro and throw and catch a baseball very accurately, when I focus. Inside me is a true athlete born to compete. I also manifest a sixth sense, if I may, at times.

By the way, it is written that my (1967 428 ci spec. equip. 428 HO "A" 4bbl YK 1045.)

There are 1045 of them built in 1967 , I guess it is back to special again or it always was, your busted.
Attached Thumbnails
Click image for larger version

Name:	906chamber.gif
Views:	1162
Size:	89.5 KB
ID:	623961   Click image for larger version

Name:	compressionratio.gif
Views:	1207
Size:	3.1 KB
ID:	623962   Click image for larger version

Name:	crank-journal-overlap.jpg
Views:	1131
Size:	28.2 KB
ID:	623963   Click image for larger version

Name:	dynamiccr_001.jpg
Views:	1147
Size:	7.8 KB
ID:	623964   Click image for larger version

Name:	engineid.jpg
Views:	1137
Size:	52.0 KB
ID:	623965  



Last edited by TRADERMIKE 2012; 11-29-2023 at 04:05 AM.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:29 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017