Electrical issue
I have a GFCI in the kitchen and it controls 2 receptacles down range. The GFCI tests out okay and resets as it should. Both receptacles check out also. I am using one of the testers that shows if there is an open ground or if the hot and common are reversed or several other options that indicate a problem but it shows correct wiring on both. Now, if I plug a phone charger or lamp or anything else into either of the receptacles the GFCI trips. This is a mystery to me. Hopefully you electrician folks can shed some light. Thanks
__________________
69 Bird w/1970 400 block(409 cubes), #64 heads, hyd. roller, Q-jet by Jeff E., original interior, ps, pdb, th350, and 3.73 gears. Pump gas, street driven muscle. 3800 lbs. race weight. Best, 11.39 @118, my son's car.
79 T/A w/463, Scat crank, Eagle rods, Icon pistons, Lunati solid roller, 262/270, KRE 325 heads, Northwind intake, QF950 carb, full interior, ps, pdb, th350, and 3.73 gears. Pump gas, 3650 lbs. race weight. 10.60 @ 126 so far...
|
07-23-2024, 05:38 PM
Threaded Mode