[joes455]

So last nite I was watch a video by Powel machine shop.He was showing how often camshafts get runout and went on to straightened a hyd roller that had .005 ro.He peened it a few times and got it to within in .0005.So the 1st thing I did this morning was check my hyd roller and it to was .004 on the center journal when sitting on my V blocks .So I convinced myself into peening at it to get it straightened .At first I was hitting the high spot and noticed ro getting worst.So started hitting low spot and finally got it almost dead nuts.I had fun doing this