Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-26-2025, 07:06 PM
dv657172's Avatar
dv657172 dv657172 is offline
Chief Ponti-yacker
 
Join Date: Mar 2012
Location: Maryville, TN
Posts: 505
Default Proper Voltage at Coil

Stock 71 GTO with points

Reinstalled engine after removing for a dipstick tube replacement and car wouldnt start

Determined that the stock Pontiac in dash Tach, which had worked fine prior to engine removal, was grounding the coil. Once disconnected the car ran ok, set dwell (30 degrees), timing (12 degrees), and curb idle at 750 rpm

When I went to start it the following day the car wouldnt start
I was able to get it to start today and run for about a minute but it ran rough and would eventually stall out

Testing the power to the positive side of the coil I have 8 volts with the key on and when the car was running it was ranging between 8 and 14 volts to the positive side of the coil before stalling out

How much voltage should I get with the key on? 12v?
Should it be a constant 14v to the positive side of the coil with the engine running?

Does this sound like a coil issue or an alternator issue?

The tach has remained disconnected since our initial start up issue, not sure why it was suddenly grounding the coil having worked fine before pulling the engine.

Thanks for any thoughts/opinions
DV

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:39 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017