[transam_101]

Hello,

I have a brand new QA1 front sway bar and found that it's 100% directly going to interfere with any supercharger cog that I plan on adding to my combo. I'm sure I can't be the only one to run into this issue, so looking for suggestions on how to tackle this problem.

Now I could simply take it off again, but I'd like to retain this thing if possible since I spent good money on it and would like the car to at least somewhat behave in turns. That being said, I believe if I shorten my end links by 2" this would place the bar under the idler arm, but would likely also require lowering the frame mounts by 2" (and possibly relocating inbound as well). I see that the offroad guys have 'drop mounts' for raised suspension setups, but I didn't know if there were suggestions for something similar in this case. Any aftermarket sway bar mounts for something like this? Any other suggestions to retain the front bar?

Thanks,
-TA101