[DaveInCanada]

@Billhanlon. I really appreciate your help and all the answers you're providing. I've tested the yellow wire for power, and there is power running through the junction connector and there is power at the Ammeter. The batter is connected, I turn the key and still no go. What should I check next?

I think I may have figured something out. I'm using Pertronix module in my distributor and a Pertronix coil. Therefore, I don't need to run the black and purple wires through the resistor. So I'm wondering if I connect both the purple (ignition #1) and the black wire (ignition #2) to the positive terminal of the coil.