| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-26-2025, 01:35 PM
|
||||
|
||||
428 street engine 3.55 gears
Ok this may or may not be a dumb question so here goes
I have a 428 large valve #16 heads w/a R/A IV cam and the Crane version of the anti-pump ... Rhoads lifters (sorry for the life of me cannot come up with correct name for them) The car it's going in is a 67 Tempest with an M-20 and 3.55 gears question is with those lifters giving me some of my low end back is this going to be a decent/spirited driver or will those gears make it sluggish? I apologize if this is stupid but the car previously had a similar 400 but had 4.10 gears Thanks in advance ......... don't be too harsh 
__________________
NEVER DRINK DOWN STREAM FROM THE HERD 
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode