 |
|
| Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
| Reply |
|
|
Thread Tools | Display Modes |
|
|
|
#1
06-12-2004, 01:57 PM
|
|||
|
|||
 First, I would like to thank Jeff Mahon for letting me test with his engine. Couldn't have done it with out him. Here is the engine specs. Super duty block bored .040 over Ross pistons to match Super duty heads #16 ported Total seal gapless rings stock crank offset ground to 4.250 stroke Eagle Rods super comp headers with 2" pri. 3" collectors Crane Hyd.Roller cam int. [email protected] exh. [email protected] 113 lsa Crane HR lifters Norris 1.6 roller rockers 1- 100% perfect Cliff Ruggles Q-jet carb IT RAN PERFECT!!! Performer RPM intake Thanks to all for the patience. It seemed to take forever to get to the dyno Also I would like to thank Roger Williams of Williams Precision Engines. 765-525-4825 Thanks...Scott
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 [email protected] |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
