| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-01-2003, 09:07 AM
|
|||
|
|||
What exactly does each of the 2 mixture screws adjust on the edelbrock carb, and how do I tune it?
Don't blame me cause your chevy broke down, you should have bought a PONTIAC!!
__________________
Hey are you ready to go, got the top turned down on my GTO. Come on,let's all jump in, gonna take this car for a little spin!! |
|
#2
02-01-2003, 09:07 AM
|
|||
|
|||
|
What exactly does each of the 2 mixture screws adjust on the edelbrock carb, and how do I tune it?
Don't blame me cause your chevy broke down, you should have bought a PONTIAC!!
__________________
Hey are you ready to go, got the top turned down on my GTO. Come on,let's all jump in, gonna take this car for a little spin!! |
|
#3
02-01-2003, 11:26 AM
|
|||
|
|||
|
They are your idle air mix screws.
If you turn them all teh way in they will make it run LEAN if you turn em too far out it will run Rich. About 2-1/2 to 3 turns out should get you close. Screw em all the way in and back em out 2-1/2 to 3 turns. mike |
|
#4
02-04-2003, 10:28 AM
|
||||
|
||||
|
If you go to the edelbrock website ( www.edelbrock.com) you can download the manual for your carb. It gives very explicit and easy steps to follow to properly set these up.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
