| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
07-28-2003, 10:57 AM
|
|||
|
|||
Ya i did the same thing with my shroud, i drilled a hole at the bottom and put a long flat head srew down through the inside of the shroud and down into the frame rail. but it took the roundness out of the shroud and made it closer on one side, so i was done with that.. i took it out all togther and am just running a flex fan. i have a 3 " spacer to get it as close to the rad.
it alwyas runs 185 while moving creeps to 215 ish in stop and go, not too bad.... maybe a 18" fan would help too, but for now i need a break from that shroud.... |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
