[John Langer]

Don't laugh, this really works! 8.5 10-bolt, moser 35 spine axels (w/ c-clip eliminators), light weight spool, precision gears, TA cover, 1 billet cap or studded stock caps, weld your axel tubes at the housing, weld a bar from where your ladder bar bracket welds to the tube to the closest point to the front of the housing ( by the pinion shaft)on both sides. lighter and stronger then a 12 bolt, dana or 9". You have to check the alignment of the axel tubes prior to doing any modifications to make sure that they are straight. With the extra money you have left over after selling you 12 bolt, get drunk!