[Mike P.]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Notify Tools Reply </div></BLOCKQUOTE>
All you need is the hog rings, hog ring pliers and a heat gun. It was not that tough, but it will try your patience. The trick is getting the listing strips hog wringed in good to get your bolsters to have some contour. Getting the hog rings through the cover, foam, then the material covering the springs and hooked into the spring themselves is a major pita. But if I can do it, so can you!