#1  
Old 05-30-2002, 02:44 AM
Trent7276 Trent7276 is offline
Member
 
Join Date: Oct 2001
Location: California, USA
Posts: 90
Default

I was installing my new water pump and the bolt on the center bottom just kept turning and turning, never getting tight...what can I do if it is stripped? I believe it goes into the timing cover...please don't tell me a new cover!! I replaced this whole thing because the plates and dividers were corroded, and a slight leak from the gasket on the bottom...

Well I sealed up all the bolts with a new gasket anyway. We will see how it holds water tomorrow! Any ideas??

__________________
Trent
1968 Firebird 400 Coupe
Muncie M-22 "Rockcrusher"
  #2  
Old 05-30-2002, 02:44 AM
Trent7276 Trent7276 is offline
Member
 
Join Date: Oct 2001
Location: California, USA
Posts: 90
Default

I was installing my new water pump and the bolt on the center bottom just kept turning and turning, never getting tight...what can I do if it is stripped? I believe it goes into the timing cover...please don't tell me a new cover!! I replaced this whole thing because the plates and dividers were corroded, and a slight leak from the gasket on the bottom...

Well I sealed up all the bolts with a new gasket anyway. We will see how it holds water tomorrow! Any ideas??

__________________
Trent
1968 Firebird 400 Coupe
Muncie M-22 "Rockcrusher"
  #3  
Old 05-30-2002, 05:30 AM
Bud Lyons's Avatar
Bud Lyons Bud Lyons is offline
Ultimate Warrior
 
Join Date: Jan 1970
Location: Willow Street, Pa
Posts: 1,823
Send a message via MSN to Bud Lyons
Default

Try JB Weld or Devcon. They are epoxy fillers. Remove your water pump and fill the bad hole with epoxy. Let it cure completely. Run a 15/64 drill bit into the epoxy. Then run a 5/16 tap in your new hole. If you let it cure you should have no problems.

__________________
WWW.PatriotGuard.org
Standing for those that stood for us.

Only two defining forces have ever offered their life for you, Jesus Christ and the American G.I.
One for your soul; the other for your freedom
  #4  
Old 05-30-2002, 05:38 AM
Johnp Johnp is offline
Senior Member
 
Join Date: Mar 2002
Location: Purcellville, Virginia
Posts: 154
Default

Have you thoought about a heli coil, they can be as strong or stronger then new.

__________________
John
  #5  
Old 05-30-2002, 06:19 AM
Bud Lyons's Avatar
Bud Lyons Bud Lyons is offline
Ultimate Warrior
 
Join Date: Jan 1970
Location: Willow Street, Pa
Posts: 1,823
Send a message via MSN to Bud Lyons
Default

Heli Coil will work better.

__________________
WWW.PatriotGuard.org
Standing for those that stood for us.

Only two defining forces have ever offered their life for you, Jesus Christ and the American G.I.
One for your soul; the other for your freedom
  #6  
Old 05-30-2002, 10:54 AM
Trent7276 Trent7276 is offline
Member
 
Join Date: Oct 2001
Location: California, USA
Posts: 90
Default

What is a Heli coil??

__________________
Trent
1968 Firebird 400 Coupe
Muncie M-22 "Rockcrusher"
  #7  
Old 05-30-2002, 10:57 AM
Jim Doran's Avatar
Jim Doran Jim Doran is offline
Ultimate Warrior
 
Join Date: Jul 2001
Location: New Milford,CT. USA
Posts: 1,256
Default

Trent, their site has good descriptions

http://www.emhart.com/products/helicoil/Default.htm

__________________
-Jim Doran-
1965 389 Tripower; 4 speed; convertible
2019 Tesla Model 3 Performance
2016 Chevy SS; Sold
2001 Toyota Tacoma 4x4
2008 Infiniti G35x
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:39 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017