I worked with a guy several years ago who was too cheap to upgrade. He ran a mid 70's Monza with a Buick V-6 and manual trans. He broke so many cone type posi units I lost count. Even had a few axles come out after blowing up the side gears and loosing the "C" clips off the axle(s). There are several versions of this axle around, around 1988 they upgraded to the 7.625" version, pretty sure they have larger axles? We still see enough of them blown up by whimpy SBC's to avoid them.......Cliff
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),
|
02-06-2005, 12:22 PM
Hybrid Mode
