[cballweg]

I need to know if there are any extra or different braces that hold on the hideaway headlights on either side of the headlight on a 1969 GTO.My car came with the exposed headlights and I want to install the hideaways.I have the hideaway headlights ,but I dont have any extra brace or bracketss.Also do I need any braces that mount the actuaors to the car?Please help.Thanks

[69 projects]

The main brackets for mounting the bumper are TOTALLY different for hideaways. the actuators have thier own separate mounts as well.

[68MeanVerdoroGreen]

Hope this helps.

[1-GTO]

Like 69Projects stated....the large front bumper braces are different on a Hide-away bumper car.The hole that the Pivot arms fit through are larger oblong holes than a regular bumper bracket that has a smaller more round hole in them.Your Non hide-away Endura bumper will have the holes for the actuators brackets to bolt onto them and the bumper should also have the bolts on the RH & LH sides in the back to mount the Headlamp Assembly (shown in the diagram) that fold down when operating the hide-aways.

You might be able to cut a larger hole in your bumper braces to accomadate the actuator arms or place an add in the "Want Adds" for the correct bumper braces?