| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
09-29-2005, 11:29 PM
|
||||
|
||||
Lots of places have parts, NAPA, Kanter, also try www.egge.com
|
|
#2
09-29-2005, 11:33 PM
|
||||
|
||||
|
Do yourself a favour and when it comes time to bore it, use std 400 pistons. Then you can use std 400 chev rings and file fit them, for a fraction of the price. It'll work out to be about 0.060 over. You can get cast pistons with both valve reliefs or use forgies with the later valve reliefs which will allow you to use later heads when you get sick of the ever always pinging early closed chamber jobs.
My 0.02c Kris |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
