[pugslyx234]

So is this jeep box from a grand cherokke or a different one . what year 93 to 99 ? found one here for 100 off a jeep grand cherokke .

[marxjunk]

Originally Posted by pugslyx234

So is this jeep box from a grand cherokke or a different one . what year 93 to 99 ? found one here for 100 off a jeep grand cherokke .

93-99 works, the grand cherokee works and is faster than any of the old stuff, but the little cheroke, the little square one, is faster than that. I have seen cherokee boxes off late model wrecks with like 30,000 miles, sell for 35 bucks on ebay, i have also seen them bring a $100, just be patient and shop. Recently i saw a box, the lines and pump go for the first bid, 4.99 shipping was like 25, still thats a deal!!!

[marxjunk]

Now that it turns, i wanted it to stop. I adapted a set of 2002 trans am/z-28 12 inches brakes to the GS too, I got the info from the net, I couldnt use everything they said, i had to shop around, but i bought everything used. I have 4 wheel 12 in brakes, aluminum BPR calipers(no ididnt paint them red) and it was 100% bolt on. I made 2 brackets,you can buy the brackets now for less than 40 bucks, i used my plasma cutter to make them, spent 20 dollars at the machine shop. $168..............haha, bear sells a simular kit ( they use PBR) for 1400................hmmmm, turns fast, stops fast, big brakes in 15 inch ralleys with 1/4 inch spacers.............78 trans am front sway bar..... i bought a 3 inch rear after matket bar from the buick site for 75 bucks hehe, if my car had more guts, i could keep up with any 2000 z 28....... mustangs....ha i laff at you...................Im a cheap sob...............lol

[Junkyard Dog]

Originally Posted by marxjunk

Now that it turns, i wanted it to stop. I adapted a set of 2002 trans am/z-28 12 inches brakes to the GS too, I got the info from the net, I couldnt use everything they said, i had to shop around, but i bought everything used. I have 4 wheel 12 in brakes, aluminum BPR calipers(no ididnt paint them red) and it was 100% bolt on. I made 2 brackets,you can buy the brackets now for less than 40 bucks, i used my plasma cutter to make them, spent 20 dollars at the machine shop. $168..............haha, bear sells a simular kit ( they use PBR) for 1400................hmmmm, turns fast, stops fast, big brakes in 15 inch ralleys with 1/4 inch spacers.............78 trans am front sway bar..... i bought a 3 inch rear after matket bar from the buick site for 75 bucks hehe, if my car had more guts, i could keep up with any 2000 z 28....... mustangs....ha i laff at you...................Im a cheap sob...............lol

Maybe you oughtta market your custom pieces along with instructions on what to buy used . . .

[marxjunk]

I have a pattern, and a list, anyone that wants it, can have it, just ask, i like to help. I will have to get it together so I can list it though. Although i like new shiney stuff, i usually do the "junkyard" stuff to piss the guys with billit off..............kinda onery like that.

Actually most of the info is out there google up "camaro big brake swap" and let the junkyarding begin!There is a pattern ya can down load with demensions and all that for free, or ya can buy the brackets, I see them on ebay for like 30 bucks. Your looking for the site where they used drum brake spindles and hubs. All bolt on! Its a camaro site, i will try to find it and post it.
It might be in the tech part of Team Camaro. Camaro and chevelle/GTO spindles are the same, the steering brkt is just turned around from one side to the other.

By the way, i've been answering to the name JYD for 12 years!