[Scarebird]

85 covers the brackets only, and an instruction sheet/parts list. We are at the budget end of the spectrum, with the added capability to fit inside almost any 14" rim. We currently use 1990 Celebrity calipers and 82-87 Firebird rear rotors, but am looking at using 78 Monte Carlo rotors/ S10 4WD calipers to eliminate the need to machine/reuse the drum hubs.

Quite a few companies, Right Stuff included, sell the original style repop brackets, spindles, etc. This is not bad, but they do not fit inside all rims, and on some use chinese rotors. The difference is how well they match the MC and prop valve to your car.

[chief many horses]

Almost right on that scare----, we do have a system for all 14" wheels that incorporates a special cut 10 3/4" rotor and there's no need to replace spindles on this one which is a definate plus.