| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
05-12-2006, 12:11 PM
|
|||
|
|||
so with 88cc heads i would be at 8.65:1, are there headgaskets out there that are thinner than .040? maybe .020...that would put me at 8.98, or is that being optimistic?
|
|
#2
05-12-2006, 02:50 PM
|
||||
|
||||
|
Best bet would be the .027" c/t 4.160" bore cometic headgasket as I mentioned before,the thinner compressed thickness along with the smaller bore size (4.160" vs. 4.300" for a "std.") should yeild just a bit more squeeze,also will help the chamber dynamics some by moving the piston closer to the head for better "squish".
They are'nt "cheap",but nothing good rarely ever is. |
|
#3
05-12-2006, 06:02 PM
|
|||
|
|||
|
i was looking through summit online and saw some SCE copper gaskets that are .021 compressed with a 4.250 bore, is there any downside to these? they are $88/set
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
