FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Shifter, auto
I have a 65 I bought as a wreck, driveable, but a wreck. I drove it down the block once and have stripped it down the the frame since. It was originally a powerglide, has a th400 now. When I ran it down the street the trans didn't seem right, so I sent it out to be rebuilt. My question is about the shifter, how do I tell if I have the right parts now that I am torn down? The console still is PG., just low and drive. I don't want to get the car all back together and not have the right shifter parts on hand.
Whats the best GTO book or books to buy for referance? Thanks, Larry |
#2
|
|||
|
|||
Larry,
If you are going to continue to use the TH400, you need to go to Shift Works and get a conversion kit that will allow you to use both the TH400 and the floor console. The kit from Shift Works will allow to keep the appearance of being stock/original, but allow you to select all 3 gears. I used it on my 64 column shift and it works great. Here is there website, http://www.shiftworks.com/ Good luck. Jim
__________________
http://www.geocities.com/jims64gto |
#3
|
|||
|
|||
Thanks Jim, That is perfect!
|
Reply |
Thread Tools | |
Display Modes | |
|
|