[Held for Ransom]

"The dimensions given in (Fig. 2-3) may be used in checking frames. Dimensions for X, Y, and Z are not given, but are used merely to illustrate points for taking diagonal measurements for checking squareness of frame. Holes or rivet heads are located on the frame at approximate terminal point of arrowheads, and can be used for this purpose."

[Daves67GTO]

So the X, Y and Z measurements aren't needed to check the frame? I have the frame at the body shop and they said they need those measurements to fix the frame. When I stand at the rear of the frame, it looks tweaked to me and I dont want to have the body put back on a bent frame. Thanks.