[strelkabuilt]

That sounds like great news Bob. Keep us posted. I have an idea as well for an oil separator.

[Robert C.]

Originally Posted by strelkabuilt

That sounds like great news Bob. Keep us posted. I have an idea as well for an oil separator.

Mark We will be glad to show you what is needed on your end of the valve cover, But..... and I hate a but in a sentence. We have to kill you after we tell you. Just kidding.

The valve cover is not the working part of this system. But a baffle will help. We will try it on a non baffled valve cover to prove a point.

The system is a two part deal not including the baffle in the valve cover.

We have looked at many systems out there that claim to work and don't. The Morso E-Vac fitting is useless. This is the one that has a hex head with holes inside of the cover.

[screamingchief]

To clarify- I meant is too much vaccum a concern when using header evac? I have all the parts to convert over.

Ohhh,OK,my mistake,I misunderstood what you were asking.

It's highly unlikely any header evac system will pull enough vacuum to be a "problem",especially on a car with any sort of exhaust on it,as well as being driven at "cruising" RPMs,it's just not designed for that situation.

It's meant to be most effective with open exhaust/racing RPMs.

[75TA]

Bob,

Thanks for the value for street use and I am looking forward to try your oil separator.

[strelkabuilt]

Originally Posted by Robert C.

Mark We will be glad to show you what is needed on your end of the valve cover, But..... and I hate a but in a sentence. We have to kill you after we tell you. Just kidding.

The valve cover is not the working part of this system. But a baffle will help. We will try it on a non baffled valve cover to prove a point.

The system is a two part deal not including the baffle in the valve cover.

We have looked at many systems out there that claim to work and don't. The Morso E-Vac fitting is useless. This is the one that has a hex head with holes inside of the cover.

That would be great if you could solve this problem. I have people ask me about that all of the time.

[Robert C.]

Mark it is solved. Finding the time to get them made is the better question.