[som2002]

Does anyone sell the black plastic clips that hold the wires on the driver side fender, I think there are 3 of them? I don't see them in resto catalogs and have never found any at area swap meets. It's for a 64 GTO, not sure if this is a common part between other years/model or not though. Thanks guys.

[Andre]

There are a couple of slightly different variations of this clip, but they all have a oval end that fits in to the accompanying hole in the inner fender. This is one of those '64 only parts that is not reproduced, but can be found on Lemans Tempest, and fullsize cars for '64, and I believe also '63.

You might be able to find some from guys who have parted cars out before. I picked up a few at the POCI meet in Greenville

[som2002]

Originally Posted by Andre

There are a couple of slightly different variations of this clip, but they all have a oval end that fits in to the accompanying hole in the inner fender. This is one of those '64 only parts that is not reproduced, but can be found on Lemans Tempest, and fullsize cars for '64, and I believe also '63.

You might be able to find some from guys who have parted cars out before. I picked up a few at the POCI meet in Greenville

OK, thanks alot for the info. I was kinda figuring it was a 1 year only deal since we were looking under various cars at a show this weekend. Even some chevys, but still could find any matches.

[zbuickman]

You talking about Tobacco days car show?? I saw your cars there. very nice If you looked at the ones on my step dads car,(white 65) They were off something 80's Cavalier. we all know the source of those they worked and fit but not "correct" There is a guy up a Jefferson every year that sells these things (and other plastic clips, hooks and thingamajigs) just NE of the buildings

[som2002]

Originally Posted by zbuickman

You talking about Tobacco days car show?? I saw your cars there. very nice If you looked at the ones on my step dads car,(white 65) They were off something 80's Cavalier. we all know the source of those they worked and fit but not "correct" There is a guy up a Jefferson every year that sells these things (and other plastic clips, hooks and thingamajigs) just NE of the buildings

Thanks Brent, and thanks for the compliment.

[A Body Engineer]

Since you are in Janesville, head north to highway X just south of Belleville and go to Jim and Joe Watkins salvage yard. There are at least 5 or 6 63 to 64 Pontiac tempests/lemans and fullsize cars. They are in good shape and have lots of good parts still on them. One of the old time type salvage yards still around the midwest.

Hope this helps,

[Peter Serio]

Are you talking about a clip that pushes thru 2 holes? As in a strap & then each end goes into a round hole in the fenderwell metal?

I know the 65-and up clips, you push one end thru a hole & the center of the other end of the clip wraps around the wiring & goes into the middle of the plastic end, forcing the "wings" on that retainer to lock in-place. On 63 & 64s the clips don't work that way & are not the same. I am looking for some for my '63 lemans.

[64-389]

I have a 64 star cheif that I'm parting out that might have that clip. I can get it to you for a real cheap price if its the right one.

[performerrpm]

ive seen all different sorts of the plastic ties that fit into the holes on the inner fenders i got some off ebay that were oe still in a bag but ive seen alot of new ones on ebay that look just the same if there similar to 66