[sandmanjoe]

hey,,, do you guys use loctite on those allen set screws on the rockers??

[Brian Baker]

Originally Posted by sandmanjoe

hey,,, do you guys use loctite on those allen set screws on the rockers??

No, absolutely not. Once you determine where you are going to have your final adjustment on the rocker nut, back it off 1/8" turn, then lightly bottom out the set screw against the top of the stud, then turn both the set screw AND the rocker nut the final 1/8" turn together. If you tighten the set screw AFTER you adjust the rocker nut to the desired position, it will eventually back off and you'll lose the set.