| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
01-22-2008, 11:27 PM
|
||||
|
||||
Robb,
Is the pickup going to angle towards the back of the tank like a stock unit, or straight down like the picture? |
|
#2
01-22-2008, 11:38 PM
|
||||
|
||||
|
Quote:
The stock ones only angle back about an inch. And they only do that so the "sock" will sit flat on the bottom rather than get bunched up during installation. It was fairly tough to design a 1/2" pickup with a 1/2" return AND still have a sending unit AND still get it all to fit in the stock hole in the tank. Making the pickup tube longer and bending it towards the back of the tank made it impossible to install. Just like when using a stock sending unit, we recommend keeping the tank at least half full when drag racing. |
|
#3
01-23-2008, 11:09 AM
|
|||
|
|||
|
Another vote for early A-body. -Jesse
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
