| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I want to add vintage air to my 62 bonneville. It has ps, pb. If anyone knows if a 400 vintage air kit will fit, please let me know. any other advise is appreciated.
Thanks BP |
|
#2
|
||||
|
||||
|
Hi Bruce, and welcome to the Forums.
I have Vintage Air's Gen II kit on my 66 GTO, so I am familar w/ their equipment. The only Pontiac specfic part that they make is the compressor mount, leaving you locate and install individual components on you car. It's not as hard as it sounds: once the factory heater is removed from the both sides of the firewall, locate and install the evaparator/heater/blower unit on the interior firewall level and centered. Bolt the compressor mount and compressor to the passenger side head, then locate and install the drier and condenser. Wire and plumb the hoses and you are ready to have the systen evaced and charged. I highly recommend the Gen II for it's ability to cool a big car w/ lots of glass and it's electronic controls that eliminate the problems associated w/routing and adjusting them. Les
__________________
Les Iden ---------------------------- '65 Buick Sport Wagon Custom, 340, T350, 3:23 '66 GTO Post/468, 700R4, 3.31 (Mike's as of 9-16) '68 Grand Prix/455, dual AFBs, T400, 2:93 posi (sold) '72 TA tribute/461, T400, 3.08, (Russ's as of 9-16) '97 Mitsubishi Eclipse Spyder Turbo, Konis, 5 speed '09 Torrent GXP, nav, Sun & Sound pkg., Bilsteins |
|
#3
|
|||
|
|||
|
Thank you much. This helps a lot. Send you a pick when installed.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|