| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
07-09-2008, 11:11 PM
|
|||
|
|||
thanks , for that that helps alot
|
|
#2
07-10-2008, 07:39 AM
|
||||
|
||||
|
R u sure its a 350 .....?? it should be stamped in the lifter bore area and or the side of the block too I believe ....
I'm not sure but I thought only 389 and up came with N cranks and or windage tray ...someone else chime in here and let us know....
__________________
 1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best [email protected] Lookin for 11's
|
|
#3
07-10-2008, 07:52 AM
|
|||
|
|||
|
cnc it said 350 on the side of the block were else do i look for the # on the crank
|
|
#4
07-10-2008, 08:22 AM
|
|||
|
|||
|
I have a crank out of a 1970 350 2 barrel engine and it has the N on it.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
