| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
Does that just mount to the original motor mount bolt?
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#2
|
||||
|
||||
|
No, The bolt I am using is much longer but the same bolt hole's (each end) Both bolts run thru the fabbed strap original mount then into the block..
It was rough on the stock driver mount ripping two previously.
__________________
![]() Nothing is impossible if you break it down into possibilities. It's all a matter of "Want to". Last edited by 1qikta; 02-03-2009 at 08:05 PM. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|