| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
04-06-2009, 08:11 AM
|
||||
|
||||
will do :)
Thanks a lot
__________________
|
|
#2
04-06-2009, 09:07 AM
|
||||
|
||||
|
I'll second the post regarding the thermostat housing. I had leakage just as you described and it was coming from the T-stat housing. I replaced the gasket (which was new) and used some RTV, but it still leaked. Re-did it but first used some sand paper or emery cloth to make sure the surfaces were smooth. Worked the second time and no problems since.
__________________
1968 Lemans Convertible Cameo Ivory, Red Interior, White Top |
|
#3
04-06-2009, 10:10 AM
|
||||
|
||||
|
That long bolt on the right hand side of the water pump needs to be tightened, same thing happened to me. It is the bolt going thru the pump housing, in my 1977 it even have a small triangle type of washer going with it.
__________________
Can do the talk, can't do the walk......therefore need deep pockets  Injection is nice but I rather be blown  If you got it flaunt it, if not fake it (Snoopy) Original 1977 Firebird / Welded tube frame connectors TH350 with shift kit / 400 bored/stroked to 455 by PDude OCD=Waxing and polishing your oil filter SICK=wetsanding your exhaust pipe |
|
#4
04-06-2009, 02:01 PM
|
||||
|
||||
|
I agree too
I will be checking this leak out real good before i go changing anything....
__________________
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
