[67'7F6'Bird]

I finished priming the front subframe and was able to use my new Ryobi Caulking gun, worked great. I am using Fusor 103EZ Black Seam Sealer. Primed part of the firewall too.

[67'7F6'Bird]

The underside of the car, front subframe, Firewall and Tulips are now painted in Extreme Chassis Black. I removed all the old seam sealer too and reapplied Fusor 103EZ. The firewall is all taped off do to interior painting.

Steve

[67'7F6'Bird]

I painted the trunk with "The Parts Place" Trunk Paint, Black Aqua, I may have mixed it too much, very little aqua flakes show on the final paint.
These pictures look lighter than it really is. The texture looks good and its rock hard.
So I ordered another quart to lightly spray over my mishap.

[67'7F6'Bird]

I sanded, treated all the metal below and behind the Dash, then sprayed it.
The floor has been completely seam sealed and primed with Encapsulator then painted with Ceramic Cassis Black.

[67'7F6'Bird]

Dash and Floor Pic's

[67'7F6'Bird]

Here is how I taped off the rear seat bracing, just trying to keep the overspray down.

I removed the heater core housing and thoroghly cleaned and removed all the rust in it, then it was painted. I am putting in the BBC Heater core and Cover. I also cleaned and lightly sanded all the plastic parts, using black plastic paint from Home Depot.

The Dash needs final sand then paint.

Went to the Machine shop yesterday and the 455's been honed and awaiting reassembly.

[67'7F6'Bird]

My brother Ed got his new Bend Pak 4 post lift for the other garage today. Here's how we got it off the truck.